Well Service Transmissions

360° Exterior View (HTML)

Details

Gross Input Power
2300.0 BHP

Gross Peak Input Torque
6656.0 ft-lb

Rated Input Speed
1900.0 r/min

Contact

Foley Equipment Sales

+1 (316) 943-4211

Request a Quote

Overview

Your operation depends on the power driving it. And your transmission is as crucial to your power solution as the engine. Cat transmissions are proven in the oil and gas industry and widely known for their exceptional power, leading durability, ease of operation, and shifting options. Ideal applications for Cat CX48-P2300 transmissions include pressure pumping, kill mud pumps, coil tubing pump support, nitrogen units, and acidizing units. CX48-P2300 transmissions are optimized for use with Cat 3512B and 3512C engines as well as with Cummins QSK45, Cummins QSK50, and MTU 12V4000 engines. Cat transmissions are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. Cat CX48-P2300 oilfield transmission. Gross input power: 1715 bkW (2300 bhp).

Features at a Glance

Benefits: • Lightweight frame increases mobility • Improved durability to meet industry needs • Built upon TH55 advanced controls, providing industry-leading performance • Designed with eight usable gears ideally suited for heavy-duty frac application • Designed to simplify maintenance

Product Support Offered Through the Global Cat Dealer Network: - More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your Cat petroleum product - Worldwide parts availability, service, and warranty - Preventive maintenance agreements available for repairbefore- failure options - SOSSM program matches your oil and coolant samples against Caterpillar set standards to determine: Internal engine component condition Presence of unwanted fluids Presence of combustion by-products Site-specific oil change interval

Website: For all your petroleum power requirements, visit www.catoilandgasinfo.com.

Specifications

Full Specifications

Transmission Specifications: Gross Input Power
2300.0 BHP

Gross Peak Input Torque
6656.0 ft-lb

Rated Input Speed
1900.0 r/min

Gear Type
Straight Planetary Spur

Gears
8F/0R

1F Gear Ratio
3.34

2F Gear Ratio
2.45

3F Gear Ratio
2.20

4F Gear Ratio
1.81

5F Gear Ratio
1.62

6F Gear Ratio
1.36

7F Gear Ratio
1.19

8F Gear Ratio
1.00

Dimensions: Width
44.4 in

Height
41.3 in

Weight
3873.0 lb

Length
74.5 in

Equipment

Standard Equipment

Cat Engines for Optimized Power Train

Cat 3512B
Cat 3512C
Cummins QSK45
Cummins QSK50
MTU 12V4000

Transmission Rotation

Input rotation — counterclockwise
Output rotation — counterclockwise (as viewed from rear)

Torque Converter

Integral torque converter
Series - TC58927-ESLF
Stall torque ratio - 2.20

Clutches

Clutches — electro-hydraulic fully modulated, oil cooled, multidisc
Clutch modulation control — Cat Electronic Clutch Pressure Control (ECPC)

Installation Connections

2 oil cooler lines
1 electrical connector

Oil System

Cat Transmission/Drive Train Oil-4 (TDTO)
Sump oil temperatures
Hydraulic Fill Capacity — Approx. 108 L (28.5 gal), 125 L (33 gal) initial fill; subject to cooler size, lines, and installation
Filter Type — 6 micron synthetic, cartridge remote mount

Mountings

Input connection (flywheel) — SAE #0
Output connections (yoke) — GWB 390.60/GWB 390.65
Structural application subject to Caterpillar approval

Control System

Electronic Control Unit (ECU)
Electronic data link, SAE J1939
Electrical system 24V

Power Take-Off Drives

Location
Mounting type: J744 SAE C
Rated power
Rotation: Clockwise as installed on SAE C pad
Ratio, 1.216:1

Optional Equipment

Integral Power Take-Off

Location: 12 o'clock
Mounting type: J704 SAE 8 bolt
Rated power
Rotation:
Ratio - 1.088:1

Resources

Transmissions Brochure

CX48-P2300 Spec Sheet

Similar New Power Solutions

TH53-E60 Transmission

Gross Input Power: 2500.0 BHP
Gross Peak Input Torque: 8914.0 ft-lb
Rated Input Speed: 1900.0 r/min