3516C (HD) Well Stimulation Engine
Well Service Engines
Details
Maximum Rating
3300.0 BHP
Emissions
EPA Non-Road Tier 2, IMO II and China Stage III
Displacement
3173.0 in³
Overview
Well stimulation operations in the oilfield are complex and demanding. The 3516C (HD) engine for well stimulation operations was specifically developed to reach the highest power nodes while meeting the highest standards in durability, reliability, and emissions. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. 3516C (HD) engines, with ratings: 2237-2461 bkW (3000-3300 bhp) @ 1900 rpm meet China Stage III and U.S. Non-road EPA Tier 2 equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.
Features at a Glance
- Custom Packaging
-
For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.
- Custom Packaging
-
For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.
- Full Range of Attachments
-
Large variety of factory-installed engine attachments reduces packaging time
- Testing
-
Every engine is full-load tested to ensure proper engine performance.
- Product Support Offered Through Global Cat Dealer
-
More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Cat parts and labor warranty Preventive maintenance agreements available for repairbefore-failure options S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval
- Over 80 Years of Engine Manufacturing Experience
-
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.
- Over 80 Years of Engine Manufacturing Experience
-
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.
- Web Site
-
For all your petroleum power requirements, visit www.catoilandgasinfo.com.
- Web Site
-
For all your petroleum power requirements, visit www.catoilandgasinfo.com.
Specifications
Full Specifications
- General Specifications
-
Maximum Rating
3300.0 BHPDisplacement
3173.0 in³Minimum Rating
3000.0 BHPAspiration
Turbocharged-AftercooledFlywheel and Flywheel Housing
SAE No. 0Flywheel Teeth
151Stroke
7.5 inBore
6.7 in
- Emissions
-
Emissions
EPA Non-Road Tier 2, IMO II and China Stage III
- Dimensions
-
Length
111.3 inWidth
70.6 inHeight
73.3 inWeight
10590.0 lb
Equipment
- Standard Equipment
-
Air Inlet System
- Separate circuit aftercooler core — corrosion resistant coated (air side), air cleaner (single element w/service indicator)
- Dual rear-mounted turbochargers
Control System
- ADEM A3 ECU — LH
- Electronic fuel injector fuel system (10 amp DC power required to drive electronic engine control unit)
Cooling System
- Torque converter connections
- Thermostats and housing, jacket water pump, gear-driven centrifugal
- Connections for radiator cooling
- Dual outlets: 88.9 mm O.D. (3.5 in) elbow hose connections
- Separate Circuit Aftercooler (SCAC)
Exhaust System
- Exhaust manifold — dry, stainless steel bellows
- Dual turbochargers with watercooled bearings
- Exhaust outlet: 292 mm I.D. (11.5 in), 12-10.5 mm dia. holes EQ SP, 376 mm bolt hole dia.
Flywheels and Flywheel Housing
- Flywheel, SAE No. 0 — 151 teeth
- Flywheel housing — SAE No. 0
Fuel System
- Primary fuel filter
- Fuel priming pump
- Fuel filter — RH spin-on type
- Fuel transfer pump
- Electronically controlled unit injectors
Instrumentation
- No standard instrumentation
- Optional, remote instrumentation available
- Service meter
Lube System
- Crankcase breather — top-mounted
- Oil cooler
- Oil filler and dipstick — RH
- Oil pump
- Oil filter — RH spin-on type
- Rear sump oil pan, 250-hour change interval
- Oil pan drain valve — 3/4" NPT female connection
Mounting System
- Trunion front support
Power Take-Offs
- Front housing — two-sided
Protection System
- ADEM A3 ECU system to provide customer-programmable engine deration strategies to protect against adverse operating conditions
- Emergency stop logic inputs provided at 40-pin customer interface connection
- Air inlet shutoff
General
- Paint — Cat yellow
- Vibration damper and guard
- Lifting eyes
- B-Series LAND
- Optional Equipment
-
Air Inlet System
- Air cleaner and air cleaner mounting
- Remote air inlet adapters
- Air inlet heater
Charging System
- Battery chargers
- Charging alternators
Control System
- Local speed throttle control
- Throttle position sensors
- Load sharing modules
- Governor conversion
Cooling System
- High gloss black folded core radiators
- Coolant regulator conversion
- Belt guard and radiator guard
- Blower fan
- Radiator cover
- Fan drive and fan pulleys
- Water level switch gauge
- Coolant level sensors
- Coolant conditioner
- Expansion tank
- Heat exchanger cooling conversion
- Auxiliary water pump
- Air separator
Emissions Certifications
- IMO Certification and European Union Certification
Exhaust System
- Flexible exhaust fitting
- Elbows and flange
- Flange and exhaust adapters
- Manifold and mufflers
Fuel Systems
- Flexible fuel lines
- Fuel cooler
- Water/fuel separator
- Fuel level switch
Instrumentation
- Customer management device
- Remote panel display and remote cylinder temperature display
- Switches and contactors
- Gauges and instrument panels
Lube System
- Fumes disposal
- Oil pans
- Prelube options
- Sump pumps
- Oil Filters
Mounting System
- Base remova
- Vibration isolators
- Rails
Power Take-Offs
- Front housing
- Flexible couplings
- Coupling hub
- Front accessory drives
- Auxiliary drive shaft
- Auxiliary drive pulleys
- Front stub shaft
- Damper guard removal
- Pulleys
- Flywheel stub shaft
Marine Society Requirements
- Marine society conversion
- Spray shielding
Protection System
- Shutoffs
- Switches and contractors
- Explosion relief valve
- Sensors
- Oil pressure monitor
- Shutoff controls
- Corrosion protection
Starting System
- Air starting motors — electric
- Air pressure regulator
- Air silencer
- Hydraulic starter
- Air start controls — manual, electric
- Redundant start
- Starting aids
- Battery sets - 24V
- Battery cable and battery rack
Similar New Power Solutions
Well Service Engines
3512E Tier 4 Final Well Service Engine
Maximum Rating:
2500.0 BHP
Emissions:
Non-Road Mobile EPA Tier 4 Final
Displacement:
3596.0 in³
Well Service Engines
Land Well Service 3512E Dynamic Gas Blending dual fuel Engine
Maximum Rating:
2500.0 BHP
Emissions:
U.S. EPA Tier 4 Final
Displacement:
3596.0 in³
Well Service Engines
C27 ACERT™ Tier 4 Final Engine
Maximum Rating:
950.0 BHP
Emissions:
U.S. EPA Tier 4 Final
Displacement:
1648.0 in³
Well Service Engines
C9.3 ACERT™ Tier 4 Final Engine
Maximum Rating:
400.0 BHP
Emissions:
EPA Tier 4 Final and EU Stage IV
Displacement:
567.5 in³
Well Service Engines
C13 ACERT™ Tier 4 Final Engine
Maximum Rating:
520.0 BHP
Emissions:
EPA Tier 4 Final and EU Stage IV
Displacement:
762.8 in³
Well Service Engines
C15 ACERT™ Tier 4 Final Engine
Maximum Rating:
580.0 BHP
Emissions:
EPA Tier 4 Final and EU Stage IV
Displacement:
927.6 in³
Well Service Engines
C32 ACERT™ Tier 4 Final Engine
Maximum Rating:
1125.0 BHP
Emissions:
U.S. EPA Tier 4 Final
Displacement:
1958.0 in³
Well Service Engines
3512C (HD) Well Stimulation Engine with Dynamic Gas Blending Kit
Maximum Rating:
2500.0 BHP
Emissions:
Non-current EPA Tier 2
Displacement:
3574.0 in³
Well Service Engines
3512C (HD) Well Stimulation Engine
Maximum Rating:
2500.0 BHP
Emissions:
Non-current EPA Tier 2 and China Stage III
Displacement:
3596.0 in³