G3606 A4 Gas Engine
Gas Compression Engines
Details
Maximum Rating
2065 BHP
Emissions
NSPS Site Compliant Capable
Displacement
7762.0 in³
Overview
G3600 ADEM™4 engines provide a wide range of power options to fit your gas compression application. G3600 ADEM™4 engines bring the highest uptime in the industry and long operating intervals between overhaul. Operators that use G3600 ADEM™4 engines in their fleet enjoy virtually no unscheduled downtime, the right power for their application, the lowest operating costs, and emissions compliance. Ideal applications for G3600 ADEM™4 engines include centralized gathering stations, gas processing, transmissions, and storage applications. Cat G3606 ADEM™4 Gen 1 gas engine with ratings: 1417bkW (1900 bhp) @ 1000 rpm and ADEM™4 Gen 2 gas engine ratings: 1540 bKW (2065 bhp) @ 1000 rpm. NSPS site compliant capable.
Features at a Glance
- Emissions
-
Meets U.S. EPA Spark Ignited Stationary NSPS Emissions for 2010 with the use of an oxidation catalyst
- Lean Burn Engine Technology
-
Lean-burn engines operate with large amounts of excess air. The excess air absorbs heat during combustion reducing the combustion temperature and pressure, greatly reducing levels of NOx. Lean-burn design also provides longer component life and excellent fuel consumption.
- Ease of Operation
-
Includes engine mounted thermostats, compress oil cooler connections, jacket water and lube oil heater connections.
- Advanced Digital Engine Management
-
ADEM4 engine management system integrates speed control, air/fuel ratio control, and ignition/detonation controls into a complete engine management system. ADEM4 has improved: user interface, display system, shutdown controls, and system diagnostics.
- Gas Engine Rating Pro
-
GERP is a web-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site's altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.https://gerp.cat.com
- Product Support Offered Through Global Cat Dealer
-
More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Cat parts and labor warranty Preventive maintenance agreements available for repairbefore-failure options S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval
- Over 80 Years of Engine Manufacturing Experience
-
Over 80 years of natural gas engine production Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products - Cast engine blocks, heads, cylinder liners, and flywheel housings - Machine critical components - Assemble complete engine
- Website
-
For all your petroleum power requirements, visit www.cat.com/oilandgas
Specifications
Full Specifications
- Engine Specifications
-
Maximum Rating
2065 BHPEmissions
NSPS Site Compliant CapableDisplacement
7762.0 in³Minimum Rating
1900 BHPCompression Ratio
9.2:1 Gen 1 (7:6:1 Gen 2)Aspiration
Turbocharged-AftercooledRotation from Flywheel End
CounterclockwiseFlywheel Teeth
255Weight - Dry
36883.0 lbOil Change Interval
5000 hoursIgnition, Protection
Electronic (ADEM™ A4)Stroke
11.8 inBore
11.8 in
- Capacity for Liquids
-
Cooling System
124.0 gal (US)Lube Oil System - Refill
187.0 gal (US)
Equipment
- Standard Equipment
-
Air Inlet System
- Air cleaner — standard-duty inlet air adapter
Control System
- A4 control system — provides electronic governing integrated with air/fuel ratio control and individual cylinder ignition timing control
- Electrical system and instrumentation certified for Class I, Division 2, Group D hazardous location. Includes entire ADEM A4 system and optional control panel.
Cooling System
- Jacket water pump
- Jacket water thermostats and housing
- Aftercooler/oil cooler pump
- Aftercooler/oil cooler thermostats and housing
- Two-stage aftercooler
- Jacket water heater connections
- Standard ANSI connections
Exhaust System
- Dry exhaust manifolds
- Single vertical outlet adapter
- Stainless steel encapsulated insulation
Flywheels and Flywheel Housing
- SAE standard rotation
Fuel System
- Gas admission valves -- electronically controlled fuel supply pressure
Ignition System
- A4 control system — senses individual cylinder detonation and controls individual cylinder timing
Lube System
- Crankcase breathers (top mounted)
- Oil cooler
- Oil filter
- Oil pan drain valves -- front and rear
Mounting System
- Engine mounting feet (four total)
Protection
- Electronic shutoff system with purge cycle
- Crankcase explosion relief valves
- Gas shutoff valve
Starting System
- Air starting system
General
- Paint — Cat yellow
- Vibration dampers
- Optional Equipment
-
Air Inlet System
- Heavy-duty air cleaner with precleaners
Charging System
- 35 Amp & 65 Amp charging alternators – CSA approved
Exhaust System
- Flexible bellows adapters
- Exhaust expander
- Weld flanges
Fuel System
- Fuel filter
- Gas pressure regulator
- Flexible connection
Instrumentation
- LCD display panel
- Remote data monitoring and speed control
- Color HMI display
- Compatible with Cat® Electronic Technician (ET) and Data View
- Modbus and Ethernet capable
Lube System
- Air or electric motor-driven prelube
- Duplex oil filter
- RH Service
- Lube oil makeup system
Mounting System
- Mounting plates (set of four)
- Extra mounting feet (set of two)
- Extra mounting plates (set of two)
Power Take-Offs
- Front stub shafts
Starting System
- Air pressure reducing valve
General
- Engine barring device
- Damper guard
Resources
Similar New Power Solutions
Gas Compression Engines
G3616 A4 Gas Compression Engine
Maximum Rating:
5500 BHP
Emissions:
NSPS Site Compliant Capable
Displacement:
20698.0 in³
Gas Compression Engines
G3608 A4 Gas Compression Engine
Maximum Rating:
2750 BHP
Emissions:
NSPS Site Compliant Capable
Displacement:
10350.0 in³
Gas Compression Engines
G3612 A4 Gas Compression Engine
Maximum Rating:
4125 BHP
Emissions:
NSPS Site Compliant Capable
Displacement:
15528.0 in³
Gas Compression Engines
G3516J Gas Engine
Maximum Rating:
1380 BHP
Emissions:
U.S. EPA Spark Ignited Stationary NSPS emissions
Displacement:
4211 in³
Gas Compression Engines
G3516 TA Gas Engine
Maximum Rating:
1380.0 BHP
Emissions:
NSPS Site Compliant Capable
Minimum Rating:
660.0 BHP
Gas Compression Engines
G3520J Gas Compression Engine
Emissions:
U.S. EPA Spark Ignited Stationary NSPS emissions for 2010
Minimum Rating:
1725.0 BHP
Bore:
6.7 in
Gas Compression Engines
G3304B Gas Compression Engine
Maximum Rating:
95.0 BHP
Emissions:
NSPS 2010
Displacement:
427.0 in³
Gas Compression Engines
G3306B Gas Compression Engine
Maximum Rating:
211.0 BHP
Emissions:
NSPS 2010
Displacement:
638.0 in³
Gas Compression Engines
G3406 Gas Compression Engine
Maximum Rating:
325.0 BHP
Emissions:
NSPS Site Compliant Capable
Displacement:
891.0 in³
Gas Compression Engines
CG137-8 Gas Compression Engine
Maximum Rating:
400.0 BHP
Emissions:
NSPS Site Compliant Capable
Displacement:
1099.0 in³