G3516 LE Gas Engine
Gas Compression Engines
Details
Maximum Rating
1340.0 BHP
Emissions
NSPS Site Compliant Capable
Displacement
4210 in³
Overview
The line of G3500 engines brings versatility, uptime, and low operating cost to your gas compression operation. They are equipped with ADEM A3 technology that enables highest performance and safety while maintaining low emissions. Ideal applications for G3500 engines include gas lift, gas gathering, and wellhead gas compression. Cat G3516 gas engine. Ratings: 492-1000 bkW (660-1340 bhp) @ 1200-1400 rpm are NSPS site compliant capable with customer-provided air-fuel ratio control and aftertreatment.
Features at a Glance
- Emissions
-
Meets U.S. EPA Spark Ignited Stationary NSPS Emissions for 2007/8
- Lean Burn Engine Technology
-
Lean-burn engines operate with large amounts of excess air. The excess air absorbs heat during combustion reducing the combustion temperature and pressure, greatly reducing levels of NOx. Lean-burn design also provides longer component life and excellent fuel consumption.
- Advanced Digital Engine Management
-
ADEM A3 control system providing integrated ignition, speed governing, protection, and controls, including detonation-sensitive variable ignition timing. ADEM A3 has improved: user interface, display system, shutdown controls, and system diagnostics.
- Ease of Operation
-
Side covers on block allow for inspection of internal components
- Full Range of Attachments
-
Large variety of factory-installed engine attachments reduces packaging time
- Testing
-
Every engine is full-load tested to ensure proper engine performance.
- Gas Engine Rating Pro
-
GERP is a web-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site's altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.
- Product Support Offered Through Global Cat Dealer
-
More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Cat parts and labor warranty Preventive maintenance agreements available for repairbefore- failure options S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval
- Over 80 Years of Engine Manufacturing Experience
-
Over 60 years of natural gas engine production Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products. - Cast engine blocks, heads, cylinder liners, and flywheel housings - Machine critical components - Assemble complete engine
- Web Site
-
For all your petroleum power requirements, visit www.catoilandgasinfo.com.
- Web Site
-
For all your petroleum power requirements, visit www.catoilandgasinfo.com.
Specifications
Full Specifications
- Engine Specifications
-
Maximum Rating
1340.0 BHPEmissions
NSPS Site Compliant CapableMinimum Rating
660.0 BHPDisplacement
4210 in³
Equipment
- Standard Equipment
-
Air Inlet System
- Air cleaner — intermediate-duty with service indicator
Control System
- A3 ECU
- Air-fuel ratio control
Cooling System
- Thermostats and housing
- Jacket water pump
- Aftercooler water pump
- Aftercooler core for sea-air atmosphere
- Aftercooler thermostats and housing
Exhaust System
- Watercooled exhaust manifolds
Flywheels & Flywheel Housings
- SAE No. 00 flywheel
- SAE No. 00 flywheel housing
- SAE standard rotation
Fuel System
- Gas pressure regulator
- Natural gas carburetor
Ignition System
- A3 ECU
Instrumentation
- PL1000 Advisor panel
Lubrication System
- Crankcase breather — top mounted
- Oil cooler
- Oil filter — RH
- Oil bypass filter
- Oil pan — shallow
- Oil sampling valve
- Turbo oil accumulator
Mounting System
- Rails, engine mounting — 254 mm (10 in)
Protection System
- Electronic shutoff system
- Gas shutoff valve
General
- Paint — Cat yellow
- Vibration damper and guard — dual 484 mm (23 in)
- Optional Equipment
-
Air Inlet System
- Remote air inlet adapters
- Precleaner
Charging System
- Battery chargers
- Charging alternators
Cooling System
- Aftercooler core
- Thermostatic valve
- Temperature switch
- Connections
- Expansion and overflow tank
- Water level switch gauge
Exhaust System
- Flexible fittings
- Elbows
- Flange
- Flange and exhaust expanders
- Rain cap
- Mufflers
Fuel System
- Low pressure gas conversions
- Propane gas valve and jet kits
- Fuel filter
Instrumentation
- PL1000 communications modules
Lubrication System
- Oil bypass filter removal and oil pan accessories
- Sump pump
- Air prelube pump
- Manual prelube pump
- Lubricating oil
Mounting System
- Rails
- Vibration isolators
Power Take-Offs
- Front accessory drives
- Auxiliary drive shafts and pulleys
- Front stub shaft
- Pulleys
Protection System
- Explosion relief valves, status control box interconnect wiring harness
Starting System
- Air starting motor
- Air pressure regulator
- Air silencer
- Electric air start controls
- Electric starting motors — dual 24-volt
- Starting aids
- Battery sets (24-volt dry), cables, and rack
General
- Flywheel intertia weight
- Guard removal
- Engine barring group
- Premium 8:1 pistons
- Premium cylinder heads
Similar New Power Solutions
Gas Compression Engines
G3606 A4 Gas Engine
Maximum Rating:
2065 BHP
Emissions:
NSPS Site Compliant Capable
Displacement:
7762.0 in³
Gas Compression Engines
G3616 A4 Gas Compression Engine
Maximum Rating:
5500 BHP
Emissions:
NSPS Site Compliant Capable
Displacement:
20698.0 in³
Gas Compression Engines
G3608 A4 Gas Compression Engine
Maximum Rating:
2750 BHP
Emissions:
NSPS Site Compliant Capable
Displacement:
10350.0 in³
Gas Compression Engines
G3612 A4 Gas Compression Engine
Maximum Rating:
4125 BHP
Emissions:
NSPS Site Compliant Capable
Displacement:
15528.0 in³
Gas Compression Engines
G3516J Gas Engine
Maximum Rating:
1380 BHP
Emissions:
U.S. EPA Spark Ignited Stationary NSPS emissions
Displacement:
4211 in³
Gas Compression Engines
G3516 TA Gas Engine
Maximum Rating:
1380.0 BHP
Emissions:
NSPS Site Compliant Capable
Minimum Rating:
660.0 BHP
Gas Compression Engines
G3520J Gas Compression Engine
Emissions:
U.S. EPA Spark Ignited Stationary NSPS emissions for 2010
Minimum Rating:
1725.0 BHP
Bore:
6.7 in
Gas Compression Engines
G3304B Gas Compression Engine
Maximum Rating:
95.0 BHP
Emissions:
NSPS 2010
Displacement:
427.0 in³
Gas Compression Engines
G3306B Gas Compression Engine
Maximum Rating:
211.0 BHP
Emissions:
NSPS 2010
Displacement:
638.0 in³
Gas Compression Engines
G3406 Gas Compression Engine
Maximum Rating:
325.0 BHP
Emissions:
NSPS Site Compliant Capable
Displacement:
891.0 in³