CG137-8 Gas Compression Engine
Gas Compression Engines
Details
Maximum Rating
400.0 BHP
Emissions
NSPS Site Compliant Capable
Displacement
1099.0 in³
Overview
Tough and durable, with field-proven head design to maximize time between overhauls. CG137 engines are equipped with ADEM A4 technology that brings performance, uptime, and low operating cost to your operation. CG137 engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime. Ideal applications for CG137-8 engines include gas lift, gas gathering, and wellhead gas compression. Cat CG137-8 gas engine. Ratings: 298 bkW (400 bhp) @ 1800 rpm are NSPS site compliant capable with customer-provided air-fuel ratio control and aftertreatment.
Features at a Glance
- Engine Design
-
- Tough and durable, with field-proven head design - When configured with customer-supplied air fuel ratio control and three-way catalyst, the engine is capable of meeting NSPS and non-attainment area emissions levels. - Integrated operator interface panel reduces hands-on time with the engine - Operator interface panel allows setup and servicing without a laptop - Runs on a broad range of fuels and speeds at any emissions level - Factory-installed components with single connection point eases packaging
- Advanced Digital Engine Management
-
The ADEM A4 system represents the next generation of engine management systems while reducing the number of mechanical components and easing troubleshooting. Features include: • Electronic ignition • Electronic governing/speed control • Start/stop logic • Engine protection and monitoring
- Full Range of Attachments
-
Large variety of factory-installed engine attachments reduces packaging time
- Gas Engine Rating Pro (GERP)
-
GERP is a web-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site's altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.
- Product Support Offered Through Global Cat Dealer
-
More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Caterpillar parts and labor warranty Preventive maintenance agreements available for repairbefore- failure options S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval
- Over 80 Years of Engine Manufacturing Experience
-
Over 60 years of natural gas engine production Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products. - Cast engine blocks, heads, cylinder liners, and flywheel housings - Machine critical components - Assemble complete engine
- Web Site
-
For all your petroleum power requirements, visit cat.com/oilandgas
Specifications
Full Specifications
- Engine Specifications
-
Maximum Rating
400.0 BHPEmissions
NSPS Site Compliant CapableDisplacement
1099.0 in³Minimum Rating
400.0 BHPCompression Ratio
10.25:1Aspiration
Turbocharged-AftercooledRotation from Flywheel End
CounterclockwiseFlywheel and Flywheel Housing
SAE No. 0Flywheel Teeth
136Weight - Dry
6250.0 lbOil Change Interval
750 hoursIgnition, Protection
Electronic ADEM A4Air/Fuel Ratio Control
Electronic ADEM A4Stroke
6.0 inBore
5.4 in
- Capacity for Liquids
-
Cooling System
14.5 gal (US)Lube Oil System - Refill
39.0 gal (US)
Equipment
- Standard Equipment
-
Air Inlet System
- Air cleaner — single element with service indicator
- Optional air inlet adapter and rain cap — recommended for weather protection
Control System
- ADEM A4
- Class 1, Division 2, Group C & D and Zone 2
Cooling System
- Jacket water thermostats and housing — full open temperature 98°C (208°F)
- Jacket water pump — gear driven, centrifugal, non-self-priming
- Aftercooler water pump — gear driven, centrifugal, non-self-priming
- Aftercooler core — for treated water and sea air atmosphere
Exhaust System
- Exhaust manifolds — watercooled
- Exhaust elbow — dry 203 mm (8 in)
Flywheels & Flywheel Housings
- Flywheel, SAE No. 14 or 18
- Flywheel housing, SAE No. 0
- SAE standard rotation
Fuel System
- Gas pressure regulator
- Natural gas carburetor
Lube System
- Crankcase breather — top mounted
- Oil cooler
- Oil filter — RH
- Oil filler in valve cover, dipstick — RH
Protection System
- ADEM A4 protection
- The following include alarm and shutdown:
- The following is display only
General
- Paint, Caterpillar yellow
- Crankshaft vibration damper and drive pulleys
- Lifting eyes
- Cylinder block inspection covers
- Optional Equipment
-
Charging Alternator
- 24V, 60A CSA alternator
Exhaust System
- Exhaust flex fitting
- Exhaust elbow
- Exhaust flange — ANSI
Instrumentation
- Operator interface panel
- Operator interface panel enclosure
- 15', 20', 50' interconnect harness
Starting System
- Air pressure regulator
- Air start silencer
- Vane starter
- Electric starter
- Turbine starter
Fuel System
- Fuel filter
Air Inlet System
- Precleaner
- Rain cap