Industrial Diesel Engines

360° Exterior View (HTML)

Details

Maximum Power
200 HP

Maximum Torque
609 lb-ft @ 1400 rpm

Emissions
U.S. EPA & CARB Tier 4 Final, EU Stage V

Contact

Foley Equipment Sales

+1 (316) 943-4211

Request a Quote

Overview

The Cat^® C4.4 Industrial Diesel Engine is offered in ratings ranging from 82-150 bkW (109-200 bhp) @ 2200 rpm, which meet U.S. EPA Tier 4 Final, EU Stage V emission standards. Industries and applications powered by C4.4 engines include: Agriculture, Aerial Lifts, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Harvesters, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers, Turf and Landscaping and Underground Mining Equipment.

Features at a Glance

Installation: A modular and compact core on the Cat C4.4 makes installing the engine on any number of machine applications a relative breeze. And when downsizing from five-liter platforms, OEMs can see a 20% reduction in length, 5% reduction in height and 40% reduction in weight of the engine, significantly reducing installation costs.

Advanced Features: With a 15% increase in power density and 10% increase in torque when compared to its predcessor engine, the compact design of the Cat C4.4 reduces heat loss for more efficient engine output, so operators can conquer even the toughest tasks with relative ease.

Ideal Applications: Industrial, agricultural and construction applications such as: Pumps • Compressors • Chippers • Grinders • Asphalt paving equipment • Hydraulic power units • Bore rigs • Drill rigs • Tractors.

Total Cost of Ownership: There's a lot that can affect the lifetime cost of ownership on your engine. It can be as simple as fluid intake and as complex as weight distribution. Either way, the Cat C4.4 has it covered. When compared to similar 6-cylinder plaforms, the C4.4 saves more than 18% in fluid consumption and is specially balanced to be its most effective, every day.

Cat Dealer Product Support: The Cat C4.4 makes maintenance and service routines simple thanks to the worldwide Cat dealer network support. And for even more peace of mind, your Cat engine comes under warranty. See your Cat dealer for details.

Safety: Built-in clean emissions modules keep the Cat C4.4 performing at its peak while also keeping the air around the work site cleaner.

Specifications

Full Specifications

Power Rating: Maximum Power
200 HP

Maximum Torque
609 lb-ft @ 1400 rpm

Rated Speed
2200 rpm

Minimum Power
109 HP

Emission Standards: Emissions
U.S. EPA & CARB Tier 4 Final, EU Stage V

General: Engine Configuration
Inline 4, 4-Stroke-Cycle Diesel

Bore
4.1 in

Stroke
5 in

Displacement
268.5 in³

Compression Ratio
16.5:1

Aspiration
Turbocharged Aftercooled (TA) or Series Turbocharged Aftercooled (TTA)

Combustion System
Direct Injection

Rotation from Flywheel End
Counterclockwise

Aftertreatment
DOC+DPF+SCR

Engine Dimensions - Approximate: Length
32.4 in

Width
29.6 in

Height
35.3 in

Weight - Net Dry - Basic Operating Engine Without Optional Attachments
1180 lb

Aftertreatment Dimensions: Length
26.5 in

Width
24.5 in

Height
17.8 in

Weight
143.3 lb

Equipment

Standard Equipment

Air Inlet System

Standard air cleaners

Control System

Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines

Cooling System

Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
50:50 water glycol mix

Flywheels and Flywheel Housing

Fitted with SAE3 configuration as standard

Fuel System

Electronic high pressure common rail
Innovative filter design to ensure maximum protection of the engine

Lube System

Wide choice of sumps for different applications

Power Take Off

SAE A and SAE B flanges on left-hand side. Additional SAE A flange available on left-hand side. Engine power can also be taken from the front of the engine on some applications. Factory fitted compressors are also available.

General

Available with or without a balancer
Paint: Caterpillar yellow, with optional colors available at request

U.S. EPA Tier 4 Final, EU Stage V Aftertreatment/ Clean Emissions Control Equipment

Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
Selective Catalytic Reduction (SCR)
3" flex pipe connection with straight, 45°, and 90° options for flexibility