Cat® C27 Diesel Engine
Industrial Diesel Engines
Details
Maximum Power
1050 HP
Maximum Torque
3448 lb-ft @ 1200 rpm
Emissions
U.S. EPA Tier 4 Final
Overview
The Cat® C27 Industrial Diesel Engine is offered in ratings ranging from 597-783 bkW (800-1050 bhp) @ 1800 rpm. These ratings meet U.S. EPA Tier 4 Final emission standards.
Features at a Glance
- Installation
-
It may be big, but the power-dense Cat C27 is a fully-configurable common core engine that makes installation across a wide variety of applications simple. With options like rear-mounted turbos and engine-mounted aftertreatment, it's now easier than ever to install. And becuase the C27 is DEF-free, there's even more room to maneuver under the hood.
- Advanced Features
-
Say goodbye to DEF, thermal management and engine regeneration with the Cat C27. Thanks to advances in Caterpillar's technology, the larger-than-life engine is practically maintenance free.
- Ideal Applications
-
Industrial and construction applications such as: Dredges • Chippers • Grinders • Emergency water pumps • Rock drills
- Total Cost of Ownership
-
Carefully crafted for efficiency, the Cat C27 fuel consumption is optimized to meet the demanding operating cycles of just about any machine. And with no DEF to worry about, owners can save on parts and maintence costs while also remaining maintenance-free for the life of the engine.
- Cat Dealer Product Support
-
Reliable dealer service and support, scheduled maintenance and an included warranty: it’s what Cat C27 owners can expect with their new engine. See your Cat dealer for details.
- Safety
-
Featuring a clean emissions module, the Cat C27 uses DOC, DPF and SCR technologies to keep the engine—and the air around it—cleaner, not only making for a more efficient machine, but also a safer job site.
Specifications
Full Specifications
- Power Rating
-
Maximum Power
1050 HPMaximum Torque
3448 lb-ft @ 1200 rpmRated Speed
1800 rpmMinimum Power
800 HP
- Emission Standards
-
Emissions
U.S. EPA Tier 4 Final
- General
-
Engine Configuration
V-12Bore
5.4 inStroke
6 inDisplacement
1649.5 in³Compression Ratio
16.0:1Aspiration
Twin Turbocharged-Aftercooled (TTA)Combustion System
Direct InjectionRotation from Flywheel End
CounterclockwiseAftertreatment
DOC
- Engine Dimensions - Approximate
-
Length
73.8 inWidth
63 inHeight
53.9 inWeight - Net Dry - Basic Operating Engine Without Optional Attachments
6625 lb
Equipment
- Standard Equipment
-
Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
Control System
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
Cooling System
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
Exhaust System
- Exhaust manifold, dry
- Optional exhaust outlet
Flywheels and Flywheel Housing
- Choice of SAE No. 0 or SAE No. 1 flywheel housing
Fuel System
- MEUI injection
- Fuel filter, secondary (2 micron)
- Fuel transfer pump
- Electronic fuel priming
Lube System
- Open crankcase ventilation system
- Oil cooler
- Oil filler
- Lube oil filter
- Rear sump oil pan
- Oil dipstick
- Gear driven oil pump
General
- Paint: Caterpillar yellow, with optional colors available at request
- Vibration damper
- Lifting eyes
Similar New Power Solutions
Industrial Diesel Engines
Cat® 3516C Industrial Diesel Engine
Maximum Power:
2100 HP
Maximum Torque:
7563 lb-ft @ 1300 rpm
Emissions:
U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)
Industrial Diesel Engines
Cat® C9.3B Diesel Engine
Maximum Power:
456 HP
Maximum Torque:
1540 lb-ft @ 1400 rpm
Emissions:
EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV
Industrial Diesel Engines
Cat® C3.6 Diesel Engine
Maximum Power:
134 HP
Maximum Torque:
406 lb-ft @ 1500 rpm
Emissions:
U.S. EPA & CARB Tier 4 Final, EU Stage V
Industrial Diesel Engines
Cat® C2.8 Diesel Engine
Maximum Power:
74 HP
Maximum Torque:
280 lb-ft @ 1360 rpm
Emissions:
U.S. EPA & CARB Tier 4 Final, EU Stage V
Industrial Diesel Engines
Cat® C4.4 Diesel Engine
Maximum Power:
200 HP
Maximum Torque:
609 lb-ft @ 1400 rpm
Emissions:
U.S. EPA & CARB Tier 4 Final, EU Stage V
Industrial Diesel Engines
Cat® C7.1 ACERT™ Diesel Engine
Maximum Power:
320 HP
Maximum Torque:
935 lb-ft @ 1400 rpm
Emissions:
U.S. EPA & CARB Tier 4 Final, EU Stage V
Industrial Diesel Engines
Cat® C15 Diesel Engine
Maximum Power:
580 HP
Maximum Torque:
1958 lb-ft @ 1400 rpm
Emissions:
U.S. EPA Tier 4 Final
Industrial Diesel Engines
Cat® C18 Diesel Engine
Maximum Power:
800 HP
Maximum Torque:
2736 lb-ft @ 1300 rpm
Emissions:
EU Stage V
Industrial Diesel Engines
Cat® C32 Diesel Engine
Maximum Power:
1200 HP
Maximum Torque:
4056 lb-ft @ 1200 rpm
Emissions:
U.S. EPA Tier 4 Final