Industrial Diesel Engines

360° Exterior View (HTML)

Details

Maximum Power
2100 HP

Maximum Torque
7563 lb-ft @ 1300 rpm

Emissions
U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)

Contact

Foley Equipment Sales

+1 (316) 943-4211

Request a Quote

Overview

The Cat® 3516C is offered at 1506 bkW (2100 bhp) @ 1750 rpm. This engine is available using EPA (U.S.) Flex provisions and for other global regulated and non-regulated areas. The 3516C offers unsurpassed performance and durability in a multitiude of industries and applications, including Bore and Drill Rigs, Chippers, Grinders, and Shredders, Cranes, Dredgers, Forestry, Material Handling, Mining and Pumps.

Features at a Glance

Reliable, Quiet and Durable Power: World-class manufacturing capability and processes coupled with proven core engine designs assure reliability, quiet operation, and many hours of productive life.

Fuel Efficiency: Fuel consumption optimized to match operating cycles of a wide range of equipment and applications while maintaining low operating costs.

Quality: Every Cat engine is manufactured to stringent quality standards in order to assure customer satisfaction.

World-class Product Support Offered Through Global Cat Dealer Network

Scheduled maintenance, including SOS^SM sample
Customer Support Agreements (CSA)
Caterpillar Extended Service Coverage (ESC)
Superior dealer service network
Extended dealer service network through the Cat Industrial Service Distributor (ISD) program

World-class Product Support Offered Through Global Cat Dealer Network

Scheduled maintenance, including SOS^SM sample
Customer Support Agreements (CSA)
Caterpillar Extended Service Coverage (ESC)
Superior dealer service network
Extended dealer service network through the Cat Industrial Service Distributor (ISD) program

Specifications

Full Specifications

Power Rating: Maximum Power
2100 HP

Maximum Torque
7563 lb-ft @ 1300 rpm

Rated Speed
1750 rpm

Minimum Power
2100 HP

Emission Standards: Emissions
U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)

General: Engine Configuration
V-16, 4-Stroke-Cycle Diesel

Bore
6.7 in

Stroke
8.5 in

Displacement
4760 in³

Compression Ratio
14.7:1

Aspiration
Turbocharged Aftercooled

Rotation from Flywheel End
Counterclockwise

Aftertreatment
-

Engine Dimensions - Approximate: Length
129.1 in

Width
60.2 in

Height
81.2 in

Weight - Net Dry - Basic Operating Engine Without Optional Attachments
17284 lb

Equipment

Standard Equipment

Air Inlet System

Air to Air Aftercooled (ATAAC)
Four turbochargers, center mounted

Control System

ADEM A4 ECM Electronic Engine Control, RH (10 amp DC power required)

Cooling System

Thermostats and housing
Gear driven centrifugal jacket water pump
Connections for radiator cooling

Exhaust System

Exhaust manifold, dry
Four turbochargers with watercooled bearings
Two exhaust outlets, 203 mm (8 in) round flange

Flywheels and Flywheel Housing

SAE No. 00 flywheel (183 teeth)
SAE No. 00 flywheel housing

Fuel System

Fuel filter, LH spin-on type
Fuel transfer pump
Electronically controlled unit injectors

Instrumentation

No standard instrument or gauge panel

Lube System

Crankcase breather, top mounted
Oil cooler
Oil filler and dipstick, LH
Oil pump
Oil filter, LH, spin-on type
Front sump oil pan, 500-hour change interval

Mounting System

Trunnion front support

Power Take Off

Front housing, two-sided

Protection System

ADEM A4 ECM monitoring system to provide customer programmable engine
Deration strategies to protect against adverse operating conditions
Emergency stop logic inputs provided at 40 pin customer interface connection

Starting System

Dual 24V electric starting motor, LH, unwired

General

Paint: Caterpillar yellow
Vibration damper
Lifting eyes

Similar New Power Solutions

Cat® C9.3B Diesel Engine

Maximum Power: 456 HP
Maximum Torque: 1540 lb-ft @ 1400 rpm
Emissions: EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV