Cat® C3.6 Diesel Engine
Industrial Diesel Engines
Details
Maximum Power
134 HP
Maximum Torque
406 lb-ft @ 1500 rpm
Emissions
U.S. EPA & CARB Tier 4 Final, EU Stage V
Overview
The Cat® C3.6 Industrial Diesel Engines offer the perfect balance of compact size, reliability, and performance. This engine is offered in ratings ranging up to 100 bkW (134 bhp) @ 2200 rpm. The C3.6 is designed to meet the needs of many industries and applications, including agricultural tractors, aircraft ground support, bore/drill rigs, chippers/grinders, compactors/rollers, compressors, forestry, irrigation equipment, material handling, mining, earthmoving equipment, paving equipment, pumps, fruit harvesters equipment, turf and underground mining equipment.
Features at a Glance
- Installation
-
Smaller in size than it's predecessor, the Cat C3.6 is a powerful engine in a compact and easily integrated size that saves OEMs valuable time and costs. With flexible aftertreatment mounting options and a simplfied engine installation process, the C3.6 can be placed into a wide variety of applications with agility and speed.
- Advanced Features
-
What would you do with 5% more power density and 12% more torque? The C3.6 uses the latest in technology to bring OEMs the most efficient and powerful engine—even at peak performance—when compared to the previous engine model.
- Ideal Applications
-
Industrial, agricultural and construction applications such as: Pumps • Compressors • Chippers • Grinders • Asphalt paving equipment • Hydraulic power units • Bore rigs • Drill rigs • Tractors • Telehandlers •
- Total Cost of Ownership
-
Owning and operating equipment is a big investment, so it only makes sense to get the most you can from it. Thanks to the chosen technologies of the Cat C3.6, owners can experience an overall savings in fluid.
- Cat Dealer Product Support
-
Backed by a five-year warranty, the Cat C3.6 is also supported by Caterpillar's unmatched Dealer Support Network with over 171 locations in 192 countries across the world—so the expert assistance you need is always close by.
- Safety
-
Safety on the job site matters. The Cat C3.6 is 3 decibles quieter output than the previous engine equivalent, meaning less noise from the engine and a more alert and attentive operator.
Specifications
Full Specifications
- Power Rating
-
Maximum Power
134 HPMaximum Torque
406 lb-ft @ 1500 rpmRated Speed
2000-2400 rpmMinimum Power
74 HP
- Emission Standards
-
Emissions
U.S. EPA & CARB Tier 4 Final, EU Stage V
- General
-
Engine Configuration
In-Line 4Bore
3.9 inStroke
4.7 inDisplacement
220 in³Compression Ratio
17.0:1Aspiration
Turbocharged-Aftercooled (TA)Combustion System
Direct InjectionRotation from Flywheel End
CounterclockwiseAftertreatment
DOC+DPF or DOC+DPF+SCR
- Engine Dimensions - Approximate
-
Length
26.3 inWidth
22.2 inHeight
31 inWeight - Net Dry - Basic Operating Engine Without Optional Attachments
840 lb
Equipment
- Standard Equipment
-
Control System
- Starter motor (12V or 24V)
- Alternator (12V or 24V)
- Electronic Control Unit (chassis mounted)
- Engine control sensors and robust wiring harness
- Data interface via CANbus J1939
Flywheels and Flywheel Housing
- Flywheel housings – SAE 3 or SAE 4
- Choice of flywheel to match industry common hydraulic pumps and transmissions
- Side PTO with SAE A or SAE B interface
Fuel System
- Fuel filter – preconnected but chassis mounted
- With water sensor
Lube System
- Lubricating oil filters
- High incline oil pan – 35° continuous in all directions
General
- Cold start capability to -20° C (-4° F) with standard equipment
- Paint: Caterpillar yellow, with optional colors available at request
U.S. EPA Tier 4 Final, EU Stage V Aftertreatment/ Clean Emissions Control Equipment
- Diesel Oxidation Catalyst (DOC)
- Selective Catalytic Reduction (SCR)
- SCR Auxiliaries
Resources
Similar New Power Solutions
Industrial Diesel Engines
Cat® 3516C Industrial Diesel Engine
Maximum Power:
2100 HP
Maximum Torque:
7563 lb-ft @ 1300 rpm
Emissions:
U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)
Industrial Diesel Engines
Cat® C9.3B Diesel Engine
Maximum Power:
456 HP
Maximum Torque:
1540 lb-ft @ 1400 rpm
Emissions:
EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV
Industrial Diesel Engines
Cat® C2.8 Diesel Engine
Maximum Power:
74 HP
Maximum Torque:
280 lb-ft @ 1360 rpm
Emissions:
U.S. EPA & CARB Tier 4 Final, EU Stage V
Industrial Diesel Engines
Cat® C4.4 Diesel Engine
Maximum Power:
200 HP
Maximum Torque:
609 lb-ft @ 1400 rpm
Emissions:
U.S. EPA & CARB Tier 4 Final, EU Stage V
Industrial Diesel Engines
Cat® C7.1 ACERT™ Diesel Engine
Maximum Power:
320 HP
Maximum Torque:
935 lb-ft @ 1400 rpm
Emissions:
U.S. EPA & CARB Tier 4 Final, EU Stage V
Industrial Diesel Engines
Cat® C15 Diesel Engine
Maximum Power:
580 HP
Maximum Torque:
1958 lb-ft @ 1400 rpm
Emissions:
U.S. EPA Tier 4 Final
Industrial Diesel Engines
Cat® C18 Diesel Engine
Maximum Power:
800 HP
Maximum Torque:
2736 lb-ft @ 1300 rpm
Emissions:
EU Stage V
Industrial Diesel Engines
Cat® C27 Diesel Engine
Maximum Power:
1050 HP
Maximum Torque:
3448 lb-ft @ 1200 rpm
Emissions:
U.S. EPA Tier 4 Final
Industrial Diesel Engines
Cat® C32 Diesel Engine
Maximum Power:
1200 HP
Maximum Torque:
4056 lb-ft @ 1200 rpm
Emissions:
U.S. EPA Tier 4 Final