www.foleyeq.com

EMCP 4.4 Master Control Panel

Switchgear and Paralleling Controls

Details

Configuration
Remote monitoring and control for up to 8 generator sets via high-speed network. Enables paralleling a group of EMCP 4.4 equipped generator sets to a single utility source.

Modes of Operation
Emergency standby, island, utility paralleling

Application
LV and MV (208V - 38 kV)

Contact

Foley Equipment Sales

+1 (316) 943-4211

Request a Quote

Overview

The EMCP 4.4 Master Control Panel is a wall mounted system that monitors and controls up to eight engine generators for operation in parallel with or without a single utility source.

Benefits

System Level Monitoring and Control

Complete system overview on 15" graphical color interface

High speed communication

Network connection to all Generators and Building Management System

Cogeneration

Optional configurations allow for bringing up to 8 generators in parallel with Utility

Features at a Glance

Product Features
  • System level overview and control for up to 8 generator sets
  • High speed communication to EMCP4.4 generator set controllers
  • Centralized Alarm Logging
  • Accommodates interface to a user Building Management System via ModBus RS-485 or Ethernet
  • Available Utility Paralleling modes
  • Password Security System to ensure system security
  • 15" Color Touchscreen HMI

Specifications

Full Specifications

Technical Summary

Configuration
Remote monitoring and control for up to 8 generator sets via high-speed network. Enables paralleling a group of EMCP 4.4 equipped generator sets to a single utility source.

Modes of Operation
Emergency standby, island, utility paralleling

Application
LV and MV (208V - 38 kV)

Generator Protective Devices

ANSI Protective Devices
15/25, 27/59, 81 O/U, 32, 40, 50, 51

Utility Protective Devices

ANSI Protective Devices
15/25. 27/59, 81 O/U, 32,47 (Industrial Grade)

Environmental Parameters

Certifications
IBC, CBC, UBC & OSHPD Certified

Control Panel Enclosure
NEMA 1 wall-mounted construction

Operating Temperature
0°C to 50°C

Storage Temperature
-20°C to +60°C

Low Voltage Standards
NEMA SG-5, CSA, ANSI C37.51, ANSI C37.20.1, UL 1558 or UL 891, NFPA 110, NFPA 99 and NFPA 70

Medium Voltage Standards
NEMA SG-5, ANSI / IEEE C37.20.2, CSA-C22.2 No. 31-M89, EEMAC G8-3.2, NFPA 70, NFPA 99 and NFPA 1110

Equipment

Standard Equipment

Configuration

  • Wall mounted supervisory control system provides centralized monitoring and control of up to eight generators equipped with EMCP4.4 paralleling control panels

Application

  • LV and MV (208V - 15 kV) 50/60Hz

Operating Temperature

  • 0-50 C

Medium Voltage Standards

  • UL 508A

Emergency Transfer Load Manager Standard Equipment

  • Data Table Interface
  • 19" Color Touchscreen
Optional Equipment

Emergency Transfer Load Manager Optional Equipment

  • Utility Monitoring and Circuit Breaker Control I/O provided in XLM version of Master Control Panel provided in XLM version of Master Control Panel

Related Products - Attachments

  • Diesel Generator Sets - C9, C13, C15, C18, C27, C32, 3500, C175

Resources

LEHE0891 EMCP 4.4 Master Control Panel XLM Configuration

LEHE0892 EMCP 4.4 Master Controller EGP Configuration

LEHE2551 EMCP 4.4 Master Controller EGP4 Configuration

Paralleling Switchgear Application & Installation Guide

Cat® Switchgear Advanced GUI / HMI Operator Interface

Similar New Power Solutions

Cat Switchgear
Switchgear and Paralleling Controls

Cat Switchgear

Configuration: IP4X
Operating Temperature: 35 °C / 40 °C @ 1 hr, option for 0…50 °C (32…122 °F)
Standard Widths: 600 mm for ABB Emax2 E2 1600 - 2500A. 750 mm for ABB Emax2 E4 3200 - 4000A. 1200 mm for ABB Emax2 E6 4000 - 6300A.

Engine Paralleling and Integration Control (EPIC)
Switchgear and Paralleling Controls

Engine Paralleling and Integration Control (EPIC)

Configuration: Remote modular paralleling control system (Master Control Panel for the first 2 generator sets and optional tie breaker, separate add-on control panels for up to 8 additional generator sets, utility paralleling control, and distribution control)
Modes of Operation: Emergency Standby with redundant master control, Utility paralleling, peak shaving, and closed transition to/from Generator Power (with optional utility control panel)
Application: LV and MV (208V-27kV)

Cat XLM Switchgear
Switchgear and Paralleling Controls

Cat XLM Switchgear

Configuration: Configurable PLC based switchgear capable of controlling and monitoring multiple generator sets, tie, utility and load breakers for utility paralleling applications
Modes of Operation: Emergency Standby, Utility Import/Export, Peak shaving, and base load operations with redundant controls and components. Closed transition to/from generator power
Application: LV and MV ( 208V - 38 kV

Cat EGP Switchgear
Switchgear and Paralleling Controls

Cat EGP Switchgear

Configuration: Configurable PLC based switchgear capable of controlling and monitoring multiple generator sets, tie and load breakers in conjunction with downstream transfer switches for standby or emergency applications
Modes of Operation: Multi-unit Island and multi-unit standby mode with optional redundant controls and components.
Application: LV and MV (208V - 38 kV)

Cat Customizable Switchgear and Controls
Switchgear and Paralleling Controls

Cat Customizable Switchgear and Controls

Configuration: Application-specific switchgear with control logic designed to meet any customer's sequence of operations. Examples are 3+ Utilities, CHP applications, complex load shed schemes, etc
Modes of Operation: All modes of paralleling generator sets to each other and to other sources (utility, alternative fuels, wind, etc) can be supported. Caterpillar generation and control experts can design and program the most complex power schemes to meet your critical power needs
Application: LV and MV ( 208V - 38 kV) 50 / 60 Hz