Diesel Generator Sets

360° Interior View (HTML)

360° Exterior View (HTML)

Virtual Product Tour

Details

Maximum Rating
40 ekW

Minimum Rating
40 ekW

Emissions/Fuel Strategy
U.S. EPA Cert., Tier 3, SCAQMD Compliant

Contact

Foley Equipment Sales

+1 (316) 943-4211

Request a Quote

Overview

40 kW Diesel Generator Set

Producing reliable power of 40 ekW at 60 Hz, our D40 GC diesel generator sets designed to ISO 8528-5 transient response requirements. All D40 GC generator sets meet EPA Stationary Emergency (Tier 3) emissions standards.

Benefits

Installed Space

Requires less space for installation; leaves more room for your on-going operations

Hours

Ensures you can count on emergency power when it is needed

Fulfillment within 24 hours

World's best product support network ensures spare parts are readily available for maintenance and service needs

Features at a Glance

Cat Generator Set Package

Cat generator set packages have been fully prototype tested
Accepts 100% block load in one step and meets NFPA 110 loading requirements
Conform to ISO 8528-5 steady state and transient response requirements

Cat Diesel Engine

Reliable, rugged, durable design
Field-proven in thousands of applications worldwide
Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

M-Frame Alternator

Superior motor starting capability minimizes need for oversizing alternator
Designed to match performance and output characteristics of Cat diesel engines
Robust Class H insulation

GCCP 1.2 Control Panel

User-friendly interface and navigation
Scalable system to meet a wide range of installation requirement
Expansion modules and site-specific programming for specific customer requirements

Cooling System

Designed to operate in standard ambient temperatures up to 55°C (131°F)
Contact your Cat Dealer for specific ambient and altitude capabilities

Certifications

UL 2200 Listed
ULC Certification Available

One Safe Source

Components used in the generator set are selected based on seamless design integration to provide the optimum performance
The generator set is fully assembled at a Caterpillar facility following our quality guidelines
Each generator set package is tested before leaving the Caterpillar facility
Cat product support, including dealer service, parts and warranty covers the entire Cat power system

Worldwide Product Support

Cat dealers have over 1,800 dealer branch stores operating in 200 countries
Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

Specifications

Full Specifications

Generator Set Specifications: Maximum Rating
40 ekW

Minimum Rating
40 ekW

Emissions/Fuel Strategy
U.S. EPA Cert., Tier 3, SCAQMD Compliant

Voltage
208 to 600 Volts

Frequency
60 Hz

Speed
1800 rpm

Duty Cycle
Standby

Engine Specifications: Engine Model
C4.4, In-line 4, 4-cycle diesel

Bore
4.1 in

Stroke
5 in

Displacement
269 in

Compression Ratio
18.2:1

Aspiration
Turbocharged

Fuel System
Common Rail

Governor Type
Mechanical, ADEM™A4

Generator Set Dimensions: Length - Maximum
77.2 in

Width - Maximum
43.3 in

Height - Maximum
48 in

Dry Weight - Genset (maximum)
1847 lb

Equipment

Standard Equipment

Certificates

IBC seismic and wind Certifications

Air Inlet System

Air cleaner
Cartridge type air filter

Circuit breakers

Breakers (100% UL rated)
Second circuit breaker box
3-Pole 100% rated
Power terminal strip

Charging System

NFPA battery charger UL10A 120VAC

Control Panel

GCCP 1.2 Control panel

Exhaust System

Stub pipe, gaskets, raincap and SAE exhaust flange for customer use - shipped loose

Fuel System

Standard open set fuel tank/base supplied base, formed steel with single wall integral 24-hour fuel tank

Control Panels

NFPA110 bundle includes:
WSS1 Low coolant level shut down
WCA1 Low coolant temperature alarm
FSS Low fuel level alarm & indication panel circuitry required when sub-base tank is selected
PBC10NU NFPA battery charger
Oil temperature gauge and sender
A Coolant heater, remote annunciator or 0.8 power factor test may be required depending on the application
PAA1 Panel mounted audible alarm
Remote E-stop button
Volt free contacts genset run and common alarm
Discrete I/O module
Audible alarm
Ground fault relay
Remote annunciator module
Overload shutdown via breaker
Low coolant level shutdown
Fuel level reading
Protective devices:
Low coolant temperature alarm

Cooling System

Caterpillar extended life coolant
Radiator and cooling fan with guards
Coolant drain line with valve
Fan drive, battery charging alternator drive
Radiator stone guard

Generator

12 Leads

Governing System

Mechanical and electrical governing system - model dependent

Lube System

Lubricating oil
Oil drain line with valve

General

Engine and alternator pre-paint, Caterpillar yellow

Starting/Charging System

Batteries
24V battery with rack and cables

Optional Equipment

Certificates

IBC seismic and wind Certifications

Air Inlet System

Cartridge type air filter

Alternator System

R Frame auxilliary winding

Charging System

NFPA battery charger UL10A 120VAC

Circuit breakers

Power terminal strip
Second circuit breaker box
Breakers (100% UL rated)
3-Pole 100% rated

Control Panels

Volt free contacts genset run and common alarm
Protective devices: Low coolant temperature alarm - Low coolant level shutdown - Fuel level reading - Overload shutdown via breaker
Discrete I/O module
Audible alarm
Ground fault relay
Remote annunciator module
NFPA110 bundle includes: FSS Low fuel level alarm & indication panel circuitry required when sub-base tank is selected - WSS1 Low coolant level shut down - WCA1 Low coolant temperature alarm - PAA1 Panel mounted audible alarm - PBC10NU NFPA battery charger - A Coolant heater ,remote annunciator or 0.8 power factor test may be required depending on the application
Oil temperature gauge and sender
Remote E-stop button

Enclosures