CTSM and CTGM Series Manual Transfer Switches
ATS MX Contactor
Details
Rating Range
40-4000A
Transfer Type
Open / Manual
Switch Type
Contactor Based
Overview
Some emergency power installations require multiple automatic transfer switches, each feeding a specific load. In many installations where noncritical loads are being served, specifications may call for manual or non-automatic transfer switches. This method is used because operating personnel are present and the loads are not of a critical nature requiring unattended automatic operation.
Because of the less critical function of this equipment, no specific industry requirements have been established. As a result, devices such as double throw disconnect switches have been used. Since the non-automatic transfer switches are part of the emergency power supply system, they should have the same UL 1008 electrical ratings as the automatic transfer switches feeding the more critical loads. In the event of a short circuit, the non-automatic transfer switches must have the same withstand current ratings as the automatic transfer switches and they must be as rugged and dependable.
Benefits
Offer
additional protection by incorporating normal and alternate source voltage sensing relays which will not permit the switch to be manually transferred unless the source to which it is being transferred is at 90% of its rated voltage
Features at a Glance
- UL, CSA and IEC Listed
-
- Amperage sizes: 40, 80, 100, 150, 200, 225, 260, 400, 600, 800, 1000, 1200, 1600, 2000, 3000, 4000
-
- Poles: 2, 3 or 4
-
- Available for operation on all standard voltage systems
-
- Withstand Current Ratings: Same as CTS Series automatic transfer switches
-
- Available in standard, delayed and closed transition versions
-
Specifications
Full Specifications
- Technical Summary
-
Rating Range
40-4000ATransfer Type
Open / ManualSwitch Type
Contactor Based
Equipment
- Standard Equipment
-
Standard Accessories
- L Indicating LED Pilot Lights:
- A - Auxiliary Contacts:
- YE Pushbutton to emergenc
- YN Pushbutton to normal