CTE Series Automatic Transfer Switch
ATS MX Contactor
Details
Rating Range
40-4000A
Transfer Type
Open / Closed / 4 position switch
Switch Type
Contactor Based
Overview
The Cat® CTE Series transfer switches are configurable for applications requiring the dependability and ease of operation found in a full featured power contactor type transfer switch.
The CTE Series is equipped with the MX350 controller that is designed for the most demanding transfer or bypass switch applications providing enhanced connectivity for accurate and timely diagnostics and event recording.
Benefits
type transfer switch
makes use of a fully programmable / configurable microprocessor-based controller to allow the utmost in application flexibility.
Features at a Glance
- Design and Construction Features
-
- Double throw, interlocked operation
- Electrically operated, mechanically held by a simple, over-center mechanism
- Silver alloy contacts with separate arcing contacts on 600 amp and above
- Arc quenching grids, enclosed arc chambers, and wide contact air gap for superior source to-source isolation on all units
- Durable solenoid ATS operated mechanisms and robust electronics, tested for severe Electro Magnetic Compatibility and Environmental conditions
- Control circuit disconnect plug and drive inhibit switch for safe maintenance
- Components accessible for inspection and maintenance without removal of the switch or the power conductors
- Mechanical indicator and contact chamber cover designed for inspection, safety and position designation
- Performance Features
-
- Standard open two position transition plus delayed and closed transition
- High close-in and withstand capability
- Temperature rise test per UL 1008 conducted after overload and endurance tests in unventilated enclosure – exceeds UL requirements
- Equipped with the MX350 Control Packag
Specifications
Full Specifications
- Technical Summary
-
Rating Range
40-4000ATransfer Type
Open / Closed / 4 position switchSwitch Type
Contactor Based
- Electrical Ratings
-
Control Power
40 to 4000 amperes, 2,3 or 4 polesEnclosure Capability
NEMA 1, 3R, 4, 4X and 12System Voltage Application
Available to 600 VAC, 50 or 60 HzApplicable Testing
<li>Seismic tested and certified to IBC 2006 & OSHPD</li> <li>CSA C22.2 No. 178 certified at 600 VAC</li> <li>IEC 947-6-1 liste
Equipment
- Standard Equipment
-
The CTE Series of Automatic Tranfser Switches
- Drive Mechanism
- Bypass Isolation Switches CBTED & CBTECT
- The Cat CTE Series power contactor type transfer switch makes use of a fully programmable/configurable microprocessor-based controller to allow the utmost in application flexibility. Further, the CTE Series is offered in a wide array of configurations enabling it to meet the needs of even the most highly critical load.
Available configurations include: - The MX350 microcontroller is a modular control and monitoring system designed specifically for low voltage transfer switch applications.
The MX350 provides the following key benefits:
Flexible control and communication options to suit any low-voltage transfer switch application
Small footprint
Modular design, which reduces the number of spare components for maintenance and testing- 40-4000 Amps:
- CTE Automatic Transfer Switches
- CTED Delayed Transition Transfer Switches
- CTEM Manual Transfer Switches
- CTECT Closed Transition Transfer Switches
- CBTE Open Transition Bypass Switches
- CBTED Delayed Transition Bypass Switches
- CBTECT Closed Transition Bypass Switches
100-4000 Amps:- CTECT Series:
- Neutral Switching
- CTE Electrical Ratings
- Safe Manual operation
- CTED Series:
Similar New Power Solutions
ATS MX Contactor
MX150 Microprocessor Controller
Rating Range:
Switch Dependent
Transfer Type:
Application Dependent
Switch Type:
Application Dependent
ATS MX Contactor
MX250 Microprocessor Controller
Rating Range:
Switch Dependent
Transfer Type:
Application Dependent
Switch Type:
Application Dependent
ATS MX Contactor
MX350 Controller
Voltage Unbalance on Dropout for Source 1 and Source 2:
5 to 20% of nominal
Delay NeutralTransition Time Delays (DT,DW):
0-10 minutes
Control Power:
120 VAC
ATS MX Contactor
CTS Series Automatic Transfer Switch
Rating Range:
40 to 4000A
Transfer Type:
Open transition
Switch Type:
Contactor Based
ATS MX Contactor
CTG Series Automatic Transfer Switch
Transfer Type:
Open transition
Rating Range:
40-3000A
Switch Type:
Contactor based
ATS MX Contactor
CTX Series Automatic Transfer Switch
Rating Range:
40-400A
Transfer Type:
Open transition
Switch Type:
Contactor Based
ATS MX Contactor
CTGSE & CTGDSE Series Service Rated Entrance Rated Automatic Transfer Switch
Switch Type:
Contactor Based
Transfer Type:
Open Transition with Service Entrance
Rating Range:
40-3000A
ATS MX Contactor
CTSM and CTGM Series Manual Transfer Switches
Rating Range:
40-4000A
Transfer Type:
Open / Manual
Switch Type:
Contactor Based